Sold out
Nucular P24F Controller: Sur-Ron, Segway, Talaria
Regular price
$750.00
Sale price
$750.00
Regular price
$950.00
Shipping calculated at checkout.
Out of stock
Nucular P24F Controller upgrade for Sur-Ron Light Bee, Segway X160/X260, Talaria Sting MX3/MX4, and Talaria X3 electric dirt bikes. In addition to its compatible presets, the Nucular P24F Controller is highly customizable.
Main Components:
- Motor Controller: controls 3-phase permanent magnet motors (BLDC, PMSM, PMAC)
- On-Board Computer: 2.9" LCD display - charge, speed, power, current, voltage, driving/control modes
- Battery Management System (BMS): manages the power flow of your battery
- Lighting Controller: controls turn signals, brake light, headlight or LED strip
Nucular P24F Controller Features
- Custom Tuning: full customization by user, configurable from display
- 5 Heatsink Cover Color Options: black/blue/red/green/orange
- ARM Cortex M4 CPU and 10 000hr 105C Low-ESR capacitors
- Voltage monitoring on all motor phases, power supply, system supply 12V, and 5V
- Synchronous rectification, ultra low drop, fast PWM to achieve very high efficiency
- Direct phase current sense and hardware over current protection
- Configurable limit for motor and battery current
- Electric brake: different modes available
- Battery protection: over current, over-voltage and under-voltage protection
- Motor and controller temperature protection
- Support motors with any number of poles
- Up to 100,000 electric RPM (ERPM = Pole pair * RPM)
- Auto-detect 60 degrees or 120-degree hall position sensors
- Support torque mode, speed mode, and combined operation, instant throttle response, no lag
- Aluminum housing for maximum heat dissipation, dual side FET for best heat distribution
- Wide types of input, configurable: 0-5V brake, switch brake, 0-5V throttle, torque pedal sensor, pedal-assist sensor
- Auto no-operation shut down
- Various modes of control: sensorless, square, combined, FOC
- Multiple controllers on the CAN bus may exist (open protocol LEVCAN)
- Charge mode through the motor with the controller, plug any DC supply to the controller to charge your battery
Nucular P24F Controller Specs
- Peak Power: 27kW (27,000W)
- Max Phase Current: 500A
- Max Battery Current: 350A
- Max Battery Voltage 90V
- Supply Out: 12V 3A
- Operating Temperature Range: -30°C to 80°C
- Phase Wires: Without wires, M6 terminals
- Battery Wires: Without wires, M6 terminals
- Hall Connectors: JWPF 8P connector (Hall/Encoder)
- Control Modes: Square, sensorless, FOC, charger, MPPT
- Protection: Temperature, hardware over-current, IO ports over-voltage protection
- Protection Class: IP67 (compound filled)
- Dimensions: 8.07 х 3.86 х 1.97 in (205 х 98 х 50 mm)
- Weight: 3.18 lbs (1440 g)
Nucular P24F Controller Kit Includes
- P24F Сontroller with compound potting + latest firmware
- CAN-wire 47.2 inch (120 cm) for On-board computer connection
- Battery and phase wire covers with screws (2)
- Screws for M6 terminals of phase wires (3)
- Screws for M6 terminals of battery wires (2)
- Pins for crimping JWPF connectors (22)
- JWPF 6P connector (4)
- JWPF 8P connectors (2)
Note: Wire for Hall sensors or Encoder is not included in the kit (sold separately)