Sold out
EBMX X-9000 Controller V3: Sur-Ron, Talaria, E Ride Pro
Regular price
$1,185.00
Sale price
$1,185.00
Regular price
Shipping calculated at checkout.
Out of stock
Upgrade your electric dirt bike with the EBMX X-9000 V3 Controller to increase your power capabilities and performance. Rated at 50kW of power, the X-9000 Controller is compatible with various electric motorbikes and motors including Sur-Ron, Talaria, E Ride Pro, and ReRode.
| The Kit Includes: | |
|---|---|
|
|
EBMX X-9000 V3 Controller Features
Built for Extreme Performance:
- Power Output: 50kW, 1000A Phase Current, 1600A Burst, 700A Max Battery Amps
- Durability: 30 120V Infineon MOSFETs for reliability under extreme conditions
- Thermal Management: Redesigned Multilayer PCB & CNC Copper Busbars
- Race-Level Endurance: Optional Water-Cooling
- Tough & Resilient: IP67 Rated & CNC Alloy Case
Next-Gen Intelligence:
- Versatile Connectivity: Industry-Leading 68 IO Support for diverse builds
- Smooth & Efficient Control: Custom EBMX VESC Firmware with Field-Oriented Control (FOC)
- Integrated Wheel Lift Assist: Fully programmable for launch control, anti-loop, or stunt mode
- Enhanced Throttle Safety: Dual Hall Throttle Ready with two ADC inputs
Race-Ready, Rider-Optimized:
- Customizable Power: 6 Fully Customizable Power Levels (Race + Street Modes)
- Intuitive Tuning: Graphical UI for Throttle Tuning, Regen Braking & EBMX E-Clutch
- Effortless Setup: Load & Go Battery Profiles (15+ plug-and-play setups)
- Instant Compatibility: Preloaded Motor Tunes (30+ motors supported out of the box)
- Future-Proof: One-Touch Updates (OTA firmware & compatibility expansion)
EBMX X9000 App (iOS and Android):
X-9000 V3 Specs
| Rated Power | 50kW (continuous) |
| Voltage | 120V |
| Working Voltage Range | 48V – 93V (22s) |
| Phase | 1000A (continuous) 1600A (burst) |
| Motor Control Protocol | Field Oriented Control (FOC) VESC |
| FEATURES | Build in IMU for integrated wheel-lift control Dual hall throttle ready X-Series App compatible for custom tuning Pre tuned for stock and aftermarket batteries Tuned for 30+ motors |
| Firmware | VESC-based motor control and firmware modified by EBMX |
| Operating Temp Range | -25° to 80° Celsius |
| Kit Includes | X-9000 Controller V3 Wire Harness, Mount, Hardware Air-Cooled Heatsink SW102T Display Regen Thumb Throttle Bluetooth Module 2-1 Harness |
| Waterproofing | IP67 |
| Warranty | 2 Years |
Compatibility
The EBMX X-9000 controller kits include all the necessary parts for OEM replacement for each of the following electric motorbikes:
X-9000 V3 Controller Adapter Kits |
|
|---|---|
| Sur-Ron Light Bee |
|
| Sur-Ron Ultra Bee |
|
| Talaria Sting MX3/MX4/MX5 |
|
| Talaria X3 |
|
| E Ride Pro SS 2.0 (Updated Plug) |
|
| E Ride Pro SS 2.0 (Old Plug) |
 If your E Ride Pro SS 2.0 has the old Battery Connector (as shown in image), you will need to purchase the old battery lead separately in order to install your X-9000 V3 Controller.Note: This Battery Lead is prone to melting, which is why E Ride Pro has switched to the new connector. |
| E Ride Pro 3.0 (w/ Circuit Breaker) | If your E Ride Pro 3.0 has a circuit breaker, then choose this adapter kit option. Early releases of E Ride Pro SS 3.0 bikes came with breakers connected to the battery lead.
|
| E Ride Pro 3.0 (No Breaker) | If you have the latest E Ride Pro SS 3.0 that does not have a circuit breaker connected to the Battery Power Lead, then choose this adapter kit option.
|
| E Ride Pro SR |
|
| ReRode R1 |
|
| 2-1 Harness (CANBus) |
|
| QS138 Harness | If running a QS138 70H or 90H, EBMX has this custom loom for the QS motor with X-9000 ignition switch & throttle input plug designed to fit a YZF450. Note: wiring length may require adjustment depending on your build design. The lengths are designed for rear mounted controller. |
X9000 is currently compatible with the following OEM motors. Each motor is fully tested and available on the EBMX app.
| Compatible Motors | |
|---|---|
|
|